UHP piping · Drawings

Checking that a pipe fitter can work from your isometrics

Give the candidate one of your own isometrics and ask them to read it back: the line number, materials, fittings, dimensions, slopes and weld or joint locations, then work out a cut length. It takes minutes and shows more than a list of past projects. Follow up with a short fit-up test if the role is mainly field fit-up.

A short drawing check

  1. Pick a real isometric with at least one change of direction and one branch.
  2. Ask for the line identification, material and pipe size.
  3. Ask the candidate to list the fittings and locate the joints.
  4. Ask for one cut length, with how they allowed for the fittings.
  5. Ask how they would mark and track the spool.
What answers tell you
AnswerMeans
Reads orientation and elevation correctlyCan work without constant supervision
Allows for fittings in cut lengthsPractical fit-up experience
Asks about tolerances and the revisionWorks to the controlled drawing
Mentions spool and joint numberingUsed to traceable work

Language and drawings

Drawings are the common language on site, but notes and abbreviations are in English. Check that the candidate understands the abbreviations used on your drawings.

Frequently asked questions

Can the drawing check be done remotely?

Yes. Share the drawing on screen during the interview and ask the questions live.

Should we test fit-up as well?

If the role is mainly field fit-up, yes — a short fit-up to your tolerance shows hand skill that a drawing check cannot.

Is CAD skill needed?

Usually not for a fitter. Reading the drawing correctly is what matters.

Have a fab scope that needs these trades?

Requests are in preview: you can fill in the request form, but it does not submit yet. Email WELDK with your roles, site country and start window.