Site leadership and quality · Certification

Does your QA/QC hire need to be a certified welding inspector?

Only if your owner specification, contract or quality plan requires it. ASME B31.3 requires examination by qualified personnel under your written practice but does not name one inspector certificate; many owners do specify one, such as AWS Certified Welding Inspector (CWI), for some or all inspection roles. Read the requirement first, then check whether a candidate’s certificate meets it.

Where the requirement comes from

Sources of an inspector certification requirement
SourceWhat it may sayWhat to check
Code of construction (for example ASME B31.3)Examination personnel must be qualified to the employer’s written proceduresYour own written practice for qualifying examiners
Owner specificationA named certification, such as AWS CWI, for a role or for weld acceptanceExact wording: which role, which certificate, any equivalents allowed
Contract or quality planNamed inspector positions and their qualificationsWhether the requirement applies to every inspector or only the lead
Local lawRarely for in-plant piping, but some jurisdictions regulate pressure system inspectionLocal counsel or authority, if in doubt

What AWS CWI is

The AWS Certified Welding Inspector is a certification issued by the American Welding Society (exams are also held outside the US), based on an examination and experience requirements, with periodic renewal. It is widely recognised, especially in North America, but it is one scheme among several. Some owners accept other national or international welding inspector certificates; some accept documented experience for junior inspectors under a certified lead. Only the owner’s wording settles this.

Read the owner’s wording carefully. “Inspection shall be performed by a CWI” is different from “the QA/QC lead shall hold CWI or equivalent”, and both are different from a requirement that only weld acceptance be signed by a certified inspector. Each leads to a different crew structure and cost.

Checking a candidate’s certificate

  1. Get the certificate number, scheme and expiry date from the candidate.
  2. Verify it with the issuing body where the body offers verification; do not rely on a scan alone.
  3. Compare the scheme with the owner’s requirement, including whether equivalents are allowed and who approves them.
  4. If the candidate holds no required certificate, ask the owner whether they could work under a certified lead, and whether a timeline for obtaining one is acceptable.
  5. Record the decision and the evidence in your QA personnel file.

Ask the owner early, in writing, before shortlisting. A late answer that a particular certificate is mandatory can remove a candidate after you have already interviewed, tested and started visa preparation, which wastes time for everyone, including the candidate.

Certification is not the whole answer

A certificate shows the person passed a general welding inspection exam. Fab UHP work also needs familiarity with orbital welds, borescope examination and the owner’s visual criteria, often based on SEMI F81. Test that in interview with real images (QA/QC interview questions).

What a WELDK profile shows

If a candidate submits an inspector certificate, WELDK staff check it and mark it reviewed only if it could be checked against records or references; WELDK does not issue certifications and does not claim candidates hold specific qualifications. Verification against the issuing body and acceptance for your project remain your QA manager’s decision.

Frequently asked questions

Is a Korean welding certificate accepted where the owner asks for AWS CWI?

Only if the owner’s specification allows an equivalent and the owner agrees. Ask in writing before you make an offer that depends on it.

Can a candidate take the AWS CWI exam after hiring?

Possibly; AWS publishes eligibility and exam arrangements on its site. Whether the owner will let the person inspect before passing is a separate question for the owner.

Does the foreman need an inspector certificate too?

Not usually, because the foreman does not accept welds. Check the owner specification in case it names supervisors.

Have a fab scope that needs these trades?

Requests are in preview: you can fill in the request form, but it does not submit yet. Email WELDK with your roles, site country and start window.