Habits to look for
- Gowning and moving through gowning areas as the site requires.
- Opening bags and removing caps only at the point of installation.
- Using tube cutters and facing tools that avoid chips, and cleaning after cutting as the specification requires.
- Wearing clean gloves and changing them when contaminated.
- Keeping tools clean and stored for cleanroom use only.
- Labelling lines and open ends clearly.
| Stage | How to check |
|---|---|
| Profile | Projects and areas worked (cleanroom, subfab), as stated by the candidate |
| Interview | Ask for the routine when a component arrives at the work area |
| Practical test | Watch bag and cap handling during the test (practical test) |
| First days | Supervisor checks during induction |
Site rules come first
Each owner has its own cleanroom protocol. Experience helps people follow it quickly; it does not replace the site induction.