UHP piping · Fittings

Face-seal fittings: what new pipers get wrong

The usual mistakes with face-seal fittings are reusing a gasket, damaging or touching the sealing beads, using the wrong gasket material, making up by feel instead of the manufacturer’s instructions, and letting the line twist while tightening. Each one causes leaks that show up at the helium test or later.

Mistakes and the right practice
MistakeRight practice
Reusing a gasketUse a new gasket every time the joint is made up
Damaged or dirty sealing beadsKeep protective caps on until make-up; inspect beads
Wrong gasket materialUse the gasket the specification lists
Making up by feelFollow the manufacturer’s make-up instructions for that gasket
Line twisting during tighteningHold the body with a back-up wrench
Stress from missing supportsSupport the line before final make-up

Why instructions matter

Make-up instructions differ by manufacturer and gasket material, so do not carry a rule from another site. Keep the instructions at the work area and include them in the briefing.

Check

Watch the first joints each new piper makes up, and review leak-test results by crew (helium leak testing).

Frequently asked questions

Can a gasket be reused if it looks fine?

No. Face-seal gaskets are designed to be used once; reuse is a common cause of leaks.

What if a sealing bead is scratched?

Do not use it. Report it; the component may need replacement.

Is VCR the same as face-seal?

VCR is one manufacturer’s brand of face-seal fitting. Follow the instructions of the brand installed.

Have a fab scope that needs these trades?

Requests are in preview: you can fill in the request form, but it does not submit yet. Email WELDK with your roles, site country and start window.