What the audit samples
| Area | Records | Typical question |
|---|---|---|
| Personnel | Welder and operator qualifications, continuity records, inspector qualifications, site training | Was this welder qualified for this weld on this date? |
| Procedures | WPS and PQR, weld schedules, owner-approved procedures | Which procedure covers this joint, and is it approved? |
| Traceability | Weld maps, weld logs, heat numbers, material certificates | Show me the material certificate for this weld. |
| Examination and test | Visual and borescope records, test records | Where is the borescope image for weld 47? |
| Nonconformance | NCR register, dispositions, closure evidence | How was this NCR closed, and who approved it? |
| Calibration | Oxygen analysers, gauges, orbital equipment as required | Was the analyser calibrated when this weld was made? |
Preparing in the week before
- Read the audit plan or ask the owner which areas and systems will be covered.
- Pick five to ten welds at random and trace each from the map to the log, welder qualification, material certificate, examination record and image.
- Fix gaps honestly: record late entries as late with the date, do not back-date.
- Check the NCR register: each one either closed with evidence or open with a plan.
- Make sure the people who keep the records will be available to answer questions.
- Brief the foreman and crew that auditors may ask them about procedures at the workface.
On the day, have one person, usually the QA/QC lead, collect every document request in a list with the time it was asked and answered. It keeps the audit orderly and shows the auditor that requests are tracked rather than lost.
Where the owner and code decide
The owner’s audit scope comes from their quality requirements and contract rights; the code sets the records that must exist. Your QA manager decides how findings are answered and by when. If an auditor asks for something your contract does not require, record the request and agree it through your QA manager rather than improvising.
After the audit
Answer each finding through your QA manager, with the cause, the correction and what will stop it recurring, and track it to closure like any other corrective action. Share findings that relate to the crew’s work with the foreman and crew, explained in a language they understand. If a finding questions a welder’s qualification or a weld’s acceptance, treat it through your normal NCR and qualification processes, not as a one-off fix for the auditor.
Keeping it from being a crisis
The audit is easy when records are kept daily (weld maps and logs) and borescope images are filed by weld number (borescope records). New crews need particular attention to qualification and continuity evidence (qualification continuity), since their records start on your site.