What each record holds
| Record | Typical content | Updated by |
|---|---|---|
| Weld map | Isometric or drawing with a unique number for each weld, revision, line and system ID | QA/QC or document control, as drawings change |
| Weld log | Weld number, welder or operator ID, WPS or weld schedule, date, material and heat numbers, examination result | QA/QC, daily, from crew sheets or machine data |
| Sample weld record | Start-of-shift or change-of-setup coupons, welder, result | QA/QC, if the owner requires sample welds |
| Examination record | Visual and borescope result, inspector, date, image reference | QA/QC |
| Repair record | Original weld, defect, repair weld number, re-examination | QA/QC |
What good traceability looks like
- Every weld in the field has its number marked as the specification requires, and the same number on the map.
- Map and log match the current drawing revision; superseded welds are shown as such, not deleted.
- Each welder ID in the log matches a valid qualification on the date of the weld.
- Heat numbers in the log link to material certificates.
- Borescope images can be found from the weld number.
- Repairs and cut-outs keep the history of the original weld.
Where the owner and code decide
ASME B31.3 requires certain records to be kept, and owner specifications for fab piping usually add more, including the weld numbering format, sample weld rules, how orbital machine weld data is kept and in what form records are handed over. Some owners require a specific database or template. Ask for these before work starts; changing the numbering scheme mid-job is painful.
The foreman’s crew sheets are the usual input: the welder marks the weld number, their ID and the date at the joint, and the foreman’s daily sheet lists the welds completed. QA/QC reconciles the two with the examination results each day. When the numbers disagree, the log should show the question and its answer, not a silent correction.
Manual sheets, spreadsheets or software
Any of these can work if the data is complete and current. What matters is a single source of truth that one person owns. Ask a candidate which system they used, how they kept it current when the crew was ahead of the paperwork, and how they handled a drawing revision that renumbered welds.
Checking a candidate’s experience
Weld map and weld log management is one of the QA/QC skills listed on WELDK’s capabilities page. On a profile it is stated per candidate; ask for a sanitised sample of a log they kept and test the skill with the exercise in QA/QC interview questions. The logs feed directly into the turnover package.