Compare the options
| Option | What it proves | Cost and time | Main risk |
|---|---|---|---|
| Live or recorded video test in Korea | That the person can set up, purge and weld the coupon you specified | Low; arranged in days to weeks | You cannot handle the coupon; editing or substitution unless the video is continuous |
| Test witnessed in Korea by your inspector or a third-party inspector | Same, plus a coupon you can examine and keep | Travel or inspection fees | Facility must have the right equipment and material |
| Screening before travel, qualification on site | Offer decision based on screening; code qualification on your equipment | Travel cost is spent before the final test | A failed site test after travel |
| Hire on documents only | Nothing about current hand skill | None up front | Highest; not recommended for fab tube work |
Define the coupon before anyone welds
- Material and condition (for example 316L EP tube) with heat number if you will trace it.
- Outside diameter and wall thickness that match the work, not the easiest size.
- The WPS or weld schedule to follow, or ask the candidate to develop one and explain it.
- Equipment: power supply and head type. If the facility has a different brand from your site, tell the candidate and expect more setup time.
- Purge: gas, flow, how oxygen is measured and the limit your specification uses.
- Inspection: outside visual, inside borescope images and what counts as acceptable.
Make a video test trustworthy
- Start with the candidate showing photo ID on camera, then keep one continuous recording.
- Show tube cutting, facing and squareness checks, tungsten preparation and head setup.
- Show the oxygen reading before the arc starts and the purge staying on while the weld cools.
- Mark the coupon on camera, weld it, then show the outside surface and a borescope view of the inside.
- Ship the coupon to you if your QA team wants to section or examine it.
Ask about the decisions, not just the weld
A short technical interview during the test shows more than a single coupon: ask why the candidate chose a level or pulse setting, what they would change if the inside bead were too narrow, and what discoloration on the inside would tell them. The answers connect to the faults in common orbital weld defects.
What WELDK does and does not do
WELDK’s profile states the candidate’s equipment experience as the candidate described it. Your company specifies, watches and judges the test, and decides whether to make an offer. WELDK does not run a test facility or certify results.