Hiring from Korea · Orbital welders

Hiring Korean orbital welders for UHP gas and chemical lines abroad

Korean orbital welders on fab projects usually weld 316L EP or BA stainless tube for specialty gas, bulk gas and chemical lines, with closed orbital heads, argon purge and oxygen checks before the arc. Before you hire one, ask which power supplies and heads they used, which tube sizes they welded, and who wrote the weld schedules. Then test them on your equipment and your smallest tube.

Also available in: 한국어 · 日本語 · 繁體中文 · Deutsch · Français · Español · Tiếng Việt · Polski · Magyar

What a Korean orbital welder usually does

Typical orbital welder tasks on a Korean fab project (confirm per person)
TaskWhat it includesAsk
Tube preparationCutting and facing tube square and cleanDid you face your own tube, or did a piper do it?
Set-upFitting the head, inserts and electrode; checking the gapWhich head models and tube sizes?
Weld scheduleSelecting or adjusting current, speed and pulse settingsDid you write schedules or only run them?
PurgeID and OD argon purge, oxygen reading before the arcWhat oxygen limit did your site use?
CouponsTest welds at the start of a shift or after a changeHow often, and who checked them?
RecordsWeld log with welder ID, heat numbers and coupon resultsCan you show how you filled in a weld log?

Questions about equipment

Orbital equipment differs by brand. A welder who knows one brand well can learn another, but needs time on your power supplies and heads. Ask for the equipment models by name, and plan supervised coupons in the first days. See switching orbital equipment brands.

How to test

  1. Agree the test before the interview: tube size, material, head model and acceptance criteria.
  2. If possible, run a screening coupon while the candidate is still in Korea (weld test in Korea).
  3. After arrival, qualify the welder to your procedure on your equipment.
  4. Review the inside of every coupon with a borescope against your owner specification.
  5. Issue a welder ID only when your QA procedure is satisfied.

Welder or welding operator

Codes often treat orbital welding as machine welding, so the qualification is for a welding operator, not a manual welder. Check which qualification your code and owner specification require (operator qualification).

Frequently asked questions

What does a Korean orbital welder do on a fab site?

Mostly autogenous orbital GTAW on 316L EP or BA stainless tube for gas and chemical lines, including set-up, purge, coupons and weld log entries.

Do Korean orbital welders bring their own equipment?

Usually not. Power supplies, heads, inserts and purge equipment are normally supplied by the site. Agree this in writing.

Can a Korean orbital welder use our equipment brand?

Usually yes, after time on your equipment. Ask which brands they used and plan supervised coupons before production work.

Do Korean orbital welders write weld schedules?

Some do; many run schedules that a lead or engineer prepared. Ask which, because writing a schedule is a different skill.

Which tube sizes should we test?

Your smallest and most common sizes. Small hook-up tube is where skill differences show most.

Is a Korean welding certificate enough for orbital work?

No. It shows training. Qualify the person to your procedure and code on your equipment.

How do we check the inside of the weld?

With a borescope on coupons, against the acceptance criteria in your owner specification.

Do Korean orbital welders speak English?

Levels vary. Many read numbers, drawings and common trade words; test site English at interview.

Can WELDK find Korean orbital welders?

Orbital welder is one of the six roles WELDK sources. Each profile states the person’s experience; your interview and test decide.

Have a fab scope that needs these trades?

Requests are in preview: you can fill in the request form, but it does not submit yet. Email WELDK with your roles, site country and start window.