Fab welding · Requirement

Writing an orbital welder requirement for UHP gas lines

A useful orbital welder requirement states the tube material and size range, the equipment the site uses, the owner specification and acceptance criteria, how the person will be tested, and the start window and assignment length. Leave out general phrases such as “experienced welder”; they match everyone and screen no one.

The fields that change who matches

Orbital welder requirement — what to state
ItemExample of a useful entryWhy it matters
Material and finish316L EP tube for specialty gas; 316L BA for bulk gasEP and BA practice and acceptance differ from general stainless work
Size rangeSmallest and largest outside diameter and wall you will weldSmall hook-up tube is where skill differences show
EquipmentPower supply and head models used on siteExperience on the same equipment shortens setup
SpecificationOwner welding specification, typically based on SEMI F78/F81Sets purge limits, sample welds and visual criteria
Work typeShop prefabrication, in-place welding, hook-upIn-place and hook-up work need compact heads and access skills
TestCoupon to your schedule, borescope review, interview topicsCandidates prepare for the right test
DocumentationWeld log, coupon log, welder ID rulesShows whether recording is part of the job
ScheduleStart window, assignment length, shift patternAvailability is often the first filter

Must-have or nice-to-have

Mark each line. Too many must-haves empty the candidate list; too few fill it with people you will reject at the test. A practical rule: must-haves are the things you will test or cannot train on site — material class, size range, purge discipline. Equipment brand is usually a nice-to-have, because setup on a new brand can be learned with supervised coupons (see switching equipment brands).

Things to leave out

  • Certificates you will not accept anyway — if you qualify everyone to your own WPS, say that instead.
  • Age, nationality or other personal criteria that are not job requirements.
  • Promises you have not decided yet, such as overtime or housing; put them in the written offer.

Sending it to WELDK

The same items map to the request form and to the profile fields WELDK reviews: processes and materials, size ranges actually welded, drawings and cleanroom practice, language and availability. A clear requirement lets staff mark which items they could review against documents before you see a profile. For manual pipe welders, see matching TIG welders to pipe materials.

Frequently asked questions

Should we ask for a minimum number of years?

Years alone say little. Ask for the tube sizes, materials and equipment used in recent projects, and test the work. If you set a minimum, keep it as a guide rather than a hard filter.

Can we ask for experience on one owner’s fab?

You can ask, but it narrows the pool a lot. Experience with a similar specification and tube class is usually the better requirement.

Do we need separate requirements for orbital and manual welders?

Yes. The skills, tests and qualifications are different, so write one requirement per trade.

Have a fab scope that needs these trades?

Requests are in preview: you can fill in the request form, but it does not submit yet. Email WELDK with your roles, site country and start window.